DETAILS OF EQUIPMENTS,MAJOR MACHINERY AND TOOLS AVAILABLE FOR CONSTRUCTION
| ACTIVITY | DESCRIPTION | QUANTITY/UNIT | |
| SURVEY | 1. | TRIMBLE DIGITAL AUTOMATIC LEVEL | 1 SET |
| 2. | TRIMBLE HOR. & VERT. LASER ALIGNMENT SYSTEM | 1 SET | |
| 3. | TRIMBLE GPS SYSTEM | 1 SET | |
| 4. | TRIMBLE ELECTRONIC TOTAL STATION | 1 SET | |
| 5. | SOKKIA TOTAL STATION | 2 SETS | |
| 6. | GARMIN HAND GPS | 3 NOS. | |
| 7. | THEODOLITE | 6 NOS. | |
| 8. | DUMPY LEVEL | 6 NOS. | |
| 9. | LEVELLING STAFF | 10 NOS. | |
| 10. | METRIC CHAINS WITH ARROWS (100 Mtr) | 5 NOS. | |
| 11. | AXES MEASURING TAPES ETC. | 10 SETS | |
| CONCRETING | 1. | CONCRETE MIXER | 12 NOS. |
| 2. | VIBRATOR (NEEDLE) | 26 NOS. | |
| 3. | VIBRATOR (SURFACE) | 4 NOS. | |
| 4. | WATER TANKER | 4 NOS. | |
| 5. | WATER PUMP | 1 NOS. | |
| 6. | FOUNDATIONS JACK | 120 NOS. | |
| 7. | WELDING MACHINE | 1 NOS. | |
| 8. | DRILL MACHINE | 1 NOS. | |
| ERECTION | 1. | P.P.ROPES/WIRE ROPES | 20 GANGS. |
| 2. | DERRICK | 56 NOS. | |
| 3. | SINGLE SLEEVES PULLEY | 140 NOS. | |
| 4. | SMALL TOOLS & TACKLE | 20 GANGS. | |
| STRINGING | 1. | AERIAL ROLLER UPTO 220 KV | 650 NOS. |
| 2. | GROUND ROLLER FOR CONDUCTOR | 10 SETS | |
| 3. | HYDRAULIC PULLER - TENSIONER Capacity- 35 kN (TESMEC) | 1 NOS. | |
| 4. | HYDRAULIC PULLER - TENSIONER Capacity- 45 kN (TESMEC) | 1 NOS. | |
| 5. | EARTHWIRE ROLLERS | 150 NOS. | |
| 6. | SINGLE ROLLER DIAMETER 400 WITHOUT YOKE PLATE | 40 NOS. | |
| 7. | TANDEM ROLLER 400mm DIAMETER | ||
| 8. | TURN TABLE – FOR CONDUCTOR (PAY OUT) | 14 NOS. | |
| 9. | TURN TABLE – FOR EARTH WIRE (PAY OUT) | 6 NOS. | |
| 10. | Turn Backle 2T Capacity | 10 NOS. | |
| 11. | Turn Backle 3T Capacity | 4 NOS. | |
| 12. | FOUR SLEEVE PULLEYS BLOCK (LUFTY) | 30 SETS | |
| 13. | SINGLE WAY PULLEY | 500 NOS. | |
| 14. | CHAIN PULLEY BLOCKS | 6 NOS. | |
| 15. | LEAD WIRES -16 DIA (ROUGH/FINAL SAGGING) | 2000 Mtr. | |
| 16. | PILOT WIRE | 7500 Mtr. | |
| 17. | BOLT TO CLAMP CONDUCTOR (ZEBRA) | 150 NOS. | |
| 18. | BOLT TO CLAMP CONDUCTOR (PANTHER) | 115 NOS. | |
| 19. | BOLT TO CLAMP CONDUCTOR (DOG/DEER) | 60 NOs. | |
| 20. | BOLT TO CLAMP EARTHWIRE (VARIOUS SIZES) | 32 NOS. | |
| 21. | AUTOMATIC CLAMP CONDUCTOR (ZEBRA) | 42 NOS. | |
| 22. | AUTOMATIC CLAMP CONDUCTOR (PANTHER) | 26 NOS. | |
| 23. | AUTOMATIC CLAMP CONDUCTOR (DOG/DEER) | 32 NOS. | |
| 24. | AUTOMATIC CLAMP EARTHWIRE (VARIOUS SIZES) | 4 NOS. | |
| 25. | ARTICULATED JOINTS | 75 NOS. | |
| 26. | TURN BUCKLES (DIFFERENT CAPACITIES) | 125 NOS. | |
| 27. | SAGGING WINCH M/C | 5 NOS. | |
| 28. | SINGLE ROPE PULLEY | 150 NOS. | |
| 29. | ACSR SOCKS (ONE END & BOTHEND OPEN) | 150 NOS. | |
| 30. | SWIVEL JOINTS. | 150 NOS. | |
| 31. | HYDRAULIC COMPRESSOR MACHINE (100 T) ALONGWITH DIES | 12 NOS. | |
| 32. | HYDRAULIC REEL | 10 NOS. | |
| 33. | DYNAMOMETER | 1 NOS. | |
| 34. | P.P.ROPES/WIRE ROPES/SMALL | 12 GANGS | |
| VEHICLE | 1. | TRUCK | 2 NOS. |
| 2. | JEEP | 6 NOS. | |
| 3. | TRACTORS/TROLLEY | 12 NOS. | |
| 4. | HYDRA CRANE | 1 NOS. | |
| 5. | D.G. SETS | 2 NOS. | |
| 6. | WELDING MACHINE | 2 NOS. | |
| 7. | GAS CUTTING SETS | 5 SETS | |
| 8. | DRILLING M/C (GENARATOR OPERATED) | 2 SETS | |